GripFun PL-U95 is designed to replace Sony BP-U60 battery which is compatible with PMW-EX1 camcorder. Rated at 6600mAh(95Wh), PL-U95's capacity is much more higher than Sony original BP-U60 battery(56Wh), which means much more longer shooting time.
The GripFun PL-U95 effectively supports professional video shooting in both the field and the studio. The battery is equipped with the professional INFO function that intelligently communicates battery status data to the PMW-EX1 camcorder.
The remaining capacity of the battery is displayed on the LCD monitor and viewfinder when the camcorder is powered on. This intelligent battery-management function allows operators to monitor the battery status easily and accurately.
GripFun PL-U95 techinical specification
Type: Li-ion
Voltage:14.8V
Dimensions:13x7x4cm
Dimensions:13x7x4cm
Weight:550 g
Operating temperature:-20 to +45 °C (-4 to +113 °F)
Remaining capacity display:four LED (20, 40, 60, and 80%)
Operating temperature:-20 to +45 °C (-4 to +113 °F)
Remaining capacity display:four LED (20, 40, 60, and 80%)
Posts
3 comments:
Where can these batteries be purchased?
After only a couple uses, my PL-U95 has suddenly started getting an error on the EX1r :
"battery error please change battery"
Even though the battery I bought from you is full and the connections
are all clean and good.
Do you have any suggestions?
Andrew Hamilton
Hamilton International Productions
www.hiproductions.com
www.vegasvideographers.com
Hamilton Family: I'm not at all related to sunpow, just another EX1 user. I think EX1 should display that message if you try to run it whit the battery just plugged to the battery mount. are you connecting the battery cable to the camera's DC in port? if you are indeed plugging the cable and still you recive that message then my guess is that theres a problem with the cable, it got cut or something.
good luck.
Post a Comment